2005 FIN Italy FIN Glue spreader SC2R-1500
FIN Glue spreader with 2 rollers
The year 2005
manufacture: FIN s.r.l. Italy
main technical specification:
Width of working: 1500mm
The maximum passage between roller: 120mm
The diameter of rollers: 185mm
Advancement speed: 19m/min
Net weight 390 Kg
Overall dimensions: 64 x 210 x 136cm
Overall dimensions with case: 73 x 222 x 153cm
400 V, 50 Hz, 037 kW
Accurate and uniform spreading with any type of glue, excellent technical characteristics,
added to the high practicalness, functionality and safety for the operator, place it at the
forefront among the 2 roller glue spreaders.
Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are
built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings.
It is easy and quick to disassemble.
Spreading, precise and uniform on one or both sides of the panels.
Special shock-absorbers, on the roller supports, allow the rollers an automatic opening
depth, so as to spread panels of different thickness within 5 mm. they also compensate for
eventual parallelism differences of the panel.
Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction
to allow cleaning.
Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy
Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal
protection prevents the introduction between the rollers of any object more than
5 mm. thick over the transit established, ensuring the maximum safety for the operator.
Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer
Control panel, with starting button, stopping button and warning light (24 V).
Rollers rotation chain with self-registrable turnbuckle pinion.
Roller washing with a bored washing tube, for the water intake during this operation.
|Model||FIN Glue spreader SC2R-1500|